As an Amazon Associate I earn from qualifying purchases.1. Dealikee
Dealikee 4 pcs TT Motor DC Gearbox Motor Dual Shaft 200RPM DC 3-6V Gear Motor for Arduino DIY Smart Car Robot
Dealikee - Perfect for arduino, Micro:bit, Robot samrt car, etc. This is a tt dc gearbox motor with a gear ratio of 1:48, and it comes with 2 x 200mm wires with breadboard-friendly 2. 54mm01" male connectors. Maximum torque: 800k.
Cm. Dc decelerating magnetic motor, reduction ratio 48:1, dual-axis motor. Wide application: scientific research electronic products, bubble gun toy gun body, four drive car toy cars, robot electric human body, aircraft toys, vibration products and other electric toys. Come with emc, it has an anti-interference ability.
| Brand | Dealikee |
| Manufacturer | Dealikee |
| Height | 2 cm (0.79 Inches) |
| Length | 3 cm (1.18 Inches) |
| Weight | 0.03 kg (0.06 Pounds) |
| Width | 4 cm (1.57 Inches) |
| Part Number | 5598533 |
| Model | C-50 |
| Warranty | 90 days |
2. FTVOGUE
N20 DC12V 200RPM Mini Speed Reduction Gear DC Motor with Full Metal Gearbox for RC Car Robot Model DIY Engine Toy
FTVOGUE - Voltage range: dc 6v-12v. High quality: made of high hardness steel, good toughness, impact resistance, durable, fine craftsmanship, not easy to wear. This is a dc mini metal gear Motor, suitable for DIY engine, electric lock, robot model.
You are welcome to contact us if you have any problem about our product and we will give you a satisfactory answer. Mini size: small, light weight and powerful, high torque and low RPM. Customer service: we have perfect after-sales teams to provide you high quality and convenient service. The lower the voltage, the torque is reduced.
| Brand | FTVOGUE |
| Manufacturer | FTVOGUE |
| Height | 1 cm (0.39 Inches) |
| Length | 6 cm (2.36 Inches) |
| Weight | 0.01 kg (0.02 Pounds) |
| Width | 4 cm (1.57 Inches) |
| Part Number | FTVOGUE3a8qetu0mx |
3. "N/A"
SPEACOUR 8 PCS TT Gear Motor 3V-6V DC Geared Motor Dual Shaft TT Motor Arduino DC Gearbox Motor for Arduino DIY Smart Car Robot Aircraft Toys/Robotic Body/Four-Wheel Drive Toy Car
"N/A" - Compared with non-emc, the current of electric TT motor is relatively small, thereby extending the overall operating life of the system. Wide range of applicationsthe geared gearbox engine is small in size and light in weight, toy airplanes, vibration products, robots, and can be widely used in scientific research electronic products, bubble guns, four-wheel drive toy cars, etc.
The quantity of one set can meets the demand for motors of any electric toy product. You can quickly start toy airplanes, toy cars and other electric products, bringing you an excellent playing experience.
You will getafter purchasing this product, you will get 8 dual shaft gear motors with a size of 22 x 19 x 65 mm. High-quality production materialsdc motor wheel kit is mainly made of sturdy and durable iron, and most of which is covered by a plastic shell, which can effectively prevent iron from oxidizing and rusting, and has long service life.
Small currentthe current of non-emc is too large, which can save transmission and distribution capacity, which has a great impact on the operation of the robot. Strong anti-interference abilitythe working efficiency of the speed reduction DC gear motor can reach more than 90%, and the anti-interference ability is strong.
| Brand | "N/A" |
| Manufacturer | "N/A" |
| Weight | 0.26 kg (0.57 Pounds) |
| Part Number | 1 |
| Model | 1 |
4. HALJIA
HALJIA DC 6V 120RPM High Torque Permanent Magnetic DC Gear Motor Micro Gear Box Motor Speed Reduction Electric Gearbox Eccentric Output Shaft
HALJIA - Great replacement for the rusty or damaged DC gear motor on the machine. Product name : gear motor; rated Voltage: DC 6V;Rated Current: 80mA.
Rpm:120rpm;. Length: 68mm; diameter: 25mm; Shaft length: 9. 5mm; shaft diameter: 4mm;. Used for automatic window curtain, optic equipment, robot, coin refund devices, safe box, electronic game machine, etc.
| Brand | HALJIA |
| Manufacturer | HALJIA |
| Height | 2.5 cm (0.98 Inches) |
| Length | 6.8 cm (2.68 Inches) |
| Weight | 0.09 kg (0.19 Pounds) |
| Width | 2.5 cm (0.98 Inches) |
| Part Number | 1 |
| Model | 1 |
5. Hyuduo
DC Gear Motor, Brush Micro Worm Gear Reducer, Mini Electric Geared MotorDC6V 35RPM
Hyuduo - This brush dc motor have strong motor power output, have good quality and low price, used for electronic locks, cameras, use superb process technology, etc, smart car, robots, cost-effective. Quality assurance, long service life.
We focus on the quality of products and care about your satisfaction. The gear motor is made of copper, stable and durable, brass and zinc alloy material, professional manufacturing, high reliability.
If you have any question, please contact us by email or Q&A, the reply will be provided within 24 hours. Quality assurance, long service life. The gear transmission is stable, package of 1 mini Gear Motor.
High quality components are used, so as to ensure its strong function, wPaear‑resistant, and possess large transmission torsion, stable performance and high compatibility.3 layers of high‑density molecular paint coating can effectively insulate dust and resistant to high temperature, professional manufacturing, stable and durable, high reliability.
| Brand | Hyuduo |
| Manufacturer | Hyuduo |
| Height | 0 cm (0 Inches) |
| Length | 0 cm (0 Inches) |
| Weight | 0.03 kg (0.07 Pounds) |
| Width | 0 cm (0 Inches) |
| Part Number | Hyuduoxn2wgsv90g-03 |
6. CHANCS
CHANCS DC Gear Motor 1:120 Single Shaft 4pcs 3-6V For Remote Control Car Robotr Electric
CHANCS - Specification: length: 64mm, height: 22mm, Width: 20mm, Material: Plastic. Shaft: Single Shaft. Voltage:3v； no-load current:≤90ma； no-load speed:54±10% rpm； voltage:6v； No-Load Current:≤130mA； No-Load Speed:108±10% rpm.
Application: there are scientific research electronic products, aircraft toys, automotive, four-wheel-drive toys, bubble gun toy gun body, robot electric body, vibration products such as electric toys products.
Package: 4pcs x DC Motor. This mini electric motor is a general purpose motor with 1:120 reduction ration, work with batteries or solar cells perfectly Great replacement for the rusty or damaged DC gear motor on the machine. Strong magnetic, with anti-interference ability.
7. Yeelua
Yeelua 2Pcs DC 6V 30RPM Micro Speed Reduction Motor with 2 Terminals for RC Car Robot Model DIY Engine Toy, Mini Gear Box Motor
Yeelua - Shaft type: d shape; shaft Diameter: 3mm; Shaft Length: 9mm. Mini dc gear motor is small and lightweight to easily mount a wheel on the motor's output shaft or copter blade.
Voltage: dc 6v; speed: 30rpm; Current: 015a. Motor size: 15 x 12 x 10mm l*w*h; gear size: 9x 10mm; total length: 36mm. Micro gearbox motor for DIY RC Hobby, drones, vehicles, planes and more. Small speed reducing motor with metal gearbox increases torque.
8. HALJIA
HALJIA 2Pcs TT Motor Smart Car Robot Gear Motor for Arduino DC3V-6V DC Gear Motor Intelligent Car Chassis Four Drive Car Hot
HALJIA - Output: 110RPM. With emc, it has an anti-interference ability. Reduction ratio: 1:90 Operating voltage: 3V ~ 6V DC. Recommended operating Voltage: about 3 to 6V DC.
| Brand | HALJIA |
| Manufacturer | HALJIA |
| Height | 2.8 cm (1.1 Inches) |
| Length | 7 cm (2.76 Inches) |
| Weight | 0.07 kg (0.15 Pounds) |
| Width | 4.5 cm (1.77 Inches) |
| Part Number | ADN1903014 |
9. Walfront
DC 12V Electric Gear Motor High Torque Speed Reduction Motor 15 / 30 / 100 / 200 RPM with Centric Output Shaft 4mm Dia for RC Car Robot Model DIY Engine Toys 15 RPM
Walfront - 4 kinds of rotary speed is optional for your choice: 15RPM, 100RPM, 30RPM, 200RPM. Full metal gears would ensure a longer service life, high torque and less noise. The low voltage dc gear motor is widely used for craft models, such as RC Car, Robot Model, DIY Engine Toys and so on.
Powered by dc 12v power supply, Full metal gears would ensure a longer service life, high torque and less noise. Gearbox diameter: 20mm /079"; centric out put shaft diameter: 4mm /016".
| Brand | Walfront |
| Manufacturer | Walfront |
| Height | 2 cm (0.79 Inches) |
| Length | 7 cm (2.76 Inches) |
| Weight | 4.9 kg (10.8 Pounds) |
| Width | 3 cm (1.18 Inches) |
| Part Number | Walfront-052303 |
10. ULTECHNOVO
ULTECHNOVO Gear Motor 3V-12V TT Motor Geared Magnetic Gearbox Engine DIY for Arduino Smart Car Robot Toys Cars 10pcs
ULTECHNOVO - Strong anti-interference ability the working efficiency of the decelerating DC geared motor can reach more than 90%, and the anti-interference ability is strong. Package includes a set of Gear Motor contains ten motors, which can meet your needs in quantity.
Wide range of applications the gearbox engine is small in size and light in weight, robots, bubble guns, and can be widely used in scientific research electronic products, vibration products, four-wheel drive toy cars, toy airplanes, etc.
High-quality production materials the dc motor wheel set is mainly made of durable iron, which can effectively prevent iron from oxidation and rust, most of which is covered by a plastic shell, and has a long service life.
Small current, which can save transmission and distribution capacity, high safety the electric TT motor has a small current, thereby extending the overall operating life of the system. You can quickly start electric products such as toy airplanes and toy cars to bring you an excellent gaming experience.
| Brand | ULTECHNOVO |
| Manufacturer | ULTECHNOVO |
| Height | 2 cm (0.79 Inches) |
| Length | 7 cm (2.76 Inches) |
| Weight | 0.2 kg (0.44 Pounds) |
| Width | 2.5 cm (0.98 Inches) |
| Part Number | X11050CFKJ66554Y4D8V |
| Model | X11050CFKJ66554Y4D8V |
Dealikee - Perfect for arduino, Micro:bit, Robot samrt car, etc. This is a tt dc gearbox motor with a gear ratio of 1:48, and it comes with 2 x 200mm wires with breadboard-friendly 2. 54mm01" male connectors. Maximum torque: 800k. Cm. Dc decelerating magnetic motor, reduction ratio 48:1, dual-axis motor. Wide application: scientific research electronic products, bubble gun toy gun body, four drive car toy cars, robot electric human body, aircraft toys, vibration products and other electric toys. Come with emc, it has an anti-interference ability.
FTVOGUE - Voltage range: dc 6v-12v. High quality: made of high hardness steel, good toughness, impact resistance, durable, fine craftsmanship, not easy to wear. This is a dc mini metal gear Motor, suitable for DIY engine, electric lock, robot model. You are welcome to contact us if you have any problem about our product and we will give you a satisfactory answer. Mini size: small, light weight and powerful, high torque and low RPM. Customer service: we have perfect after-sales teams to provide you high quality and convenient service. The lower the voltage, the torque is reduced.
"N/A" - Compared with non-emc, the current of electric TT motor is relatively small, thereby extending the overall operating life of the system. Wide range of applicationsthe geared gearbox engine is small in size and light in weight, toy airplanes, vibration products, robots, and can be widely used in scientific research electronic products, bubble guns, four-wheel drive toy cars, etc.
HALJIA - Great replacement for the rusty or damaged DC gear motor on the machine. Product name : gear motor; rated Voltage: DC 6V;Rated Current: 80mA. Rpm:120rpm;. Length: 68mm; diameter: 25mm; Shaft length: 9. 5mm; shaft diameter: 4mm;. Used for automatic window curtain, optic equipment, robot, coin refund devices, safe box, electronic game machine, etc.
Hyuduo - This brush dc motor have strong motor power output, have good quality and low price, used for electronic locks, cameras, use superb process technology, etc, smart car, robots, cost-effective. Quality assurance, long service life.
CHANCS - Specification: length: 64mm, height: 22mm, Width: 20mm, Material: Plastic. Shaft: Single Shaft. Voltage:3v； no-load current:≤90ma； no-load speed:54±10% rpm； voltage:6v； No-Load Current:≤130mA； No-Load Speed:108±10% rpm.
Yeelua - Shaft type: d shape; shaft Diameter: 3mm; Shaft Length: 9mm. Mini dc gear motor is small and lightweight to easily mount a wheel on the motor's output shaft or copter blade. Voltage: dc 6v; speed: 30rpm; Current: 015a. Motor size: 15 x 12 x 10mm l*w*h; gear size: 9x 10mm; total length: 36mm. Micro gearbox motor for DIY RC Hobby, drones, vehicles, planes and more. Small speed reducing motor with metal gearbox increases torque.
HALJIA - Output: 110RPM. With emc, it has an anti-interference ability. Reduction ratio: 1:90 Operating voltage: 3V ~ 6V DC. Recommended operating Voltage: about 3 to 6V DC.
Walfront - 4 kinds of rotary speed is optional for your choice: 15RPM, 100RPM, 30RPM, 200RPM. Full metal gears would ensure a longer service life, high torque and less noise. The low voltage dc gear motor is widely used for craft models, such as RC Car, Robot Model, DIY Engine Toys and so on. Powered by dc 12v power supply, Full metal gears would ensure a longer service life, high torque and less noise. Gearbox diameter: 20mm /079"; centric out put shaft diameter: 4mm /016".
ULTECHNOVO - Strong anti-interference ability the working efficiency of the decelerating DC geared motor can reach more than 90%, and the anti-interference ability is strong. Package includes a set of Gear Motor contains ten motors, which can meet your needs in quantity.
