As an Amazon Associate I earn from qualifying purchases.1. Nintendo
Nintendo Neon Purple/ Neon Orange Joy-Con L/R, Official Nintendo Switch JoyCon Controllers Pair
Nintendo - They can also attach to the main console for use in handheld mode, or be shared with friends to enjoy two player action in supported games. Two joy con can be used independently in each hand, or together as 1 game controller when attached to the Joy Con grip.
Each joy con has a full set of buttons and can act as a standalone controller, and each includes an accelerometer and gyro sensor, making independent left and right motion control possible.
| Brand | Nintendo |
| Height | 5.08 cm (2 Inches) |
| Length | 2.54 cm (1 Inches) |
| Weight | 0.1 kg (0.22 Pounds) |
| Width | 5.08 cm (2 Inches) |
| Part Number | HACAJAQAA |
| Model | HACAJAQAA |
2. TNP Products
Switch OLED, TNP Joy-Con Grip for Nintendo Switch / OLED 2 Pack White Comfortable Grip Wear Resistant Joy-Con Handle Game Controller Kit Accessory for Nintendo Switch
TNP Products - Lightweight & ergonomic design with round edges curves making the grip comfortable to hold and reduces hand fatigue; increases gaming enjoyability and durability.
Extra protection for your Joy-Con from scratches, bumps or drops with this firm cover design grip. Designed to provide superior grip and enhanced comfort level in your palms; Ideal for those extended, high-stress gaming sessions.
Precise cutouts for both left and right joy con controllers allow full access to all buttons, ZR, including the L, SL, ZL, R, SR buttons, without restricting game play or movement. Easy install and removal of joy-con from the controller grip and no need for special tools, the 4 rubber pad inside the controller grip slot firmly secures your Joy-Con.
| Brand | TNP Products |
| Manufacturer | TNP Products |
| Height | 8 cm (3.15 Inches) |
| Length | 14 cm (5.51 Inches) |
| Width | 11.48 cm (4.52 Inches) |
| Part Number | NDSWT_JC_GRP_WHT |
3. Sumind
Joy-Con Controller Pink White Turquoise Yellow, Thumb Grip Caps Analog Thumb Stick Grips Silicone Cover Compatible with Nintendo Switch and Lite, 16 Pieces Sakura Flower Thumb Grip Caps
Sumind - Wonderful gaming experience: soft touch of the surface and the color design provides you with more accuracy and sensitivity for a more enjoyable play; Whether you are a casual gamer or a hardcore gamer, you can control your game world. Effective protection: soft silicon can protect the analog stick caps from long term corrosion and spalling, and prevent your gamer from bumps and scrapes, so these grip caps will make your equipment last longer; Apply it to make the joystick cap firmly cover over the joystick, no need to worry about shaking and not fitting.
Quality thumb grips: made of quality silicone material, which is non-slip, non-toxic and odorless; This grip caps can enhance your gaming experience and prevent your fingers from slipping and can serve for a long time using, which can save time for you.
Please note: some joystick cut-out holes of gamer protection case might be too small, which may result in compatibility problems when using both the case and thumb grips; We recommend you not using protection case, at least not using those with small cut-out holes. Charming to look: pretty sakura flower pattern adds fun and vitality for your switch and switch lite, and makes it more eye-catching and let you show your personality; No more boring "black or white" designs, we present this colorful design.
| Brand | Sumind |
| Manufacturer | Sumind |
| Part Number | Sumind-Thumb Grip-01 |
| Model | Sumind-Thumb Grip-01 |
4. MoKo
MoKo Grip for Nintendo Switch Joy-Con, 2-Pack Ergonomic Design Wear-Resistant Game Controller Handle Kit for Nintendo Switch Joy-Con Red and Blue
MoKo - 9658 extra protection - special Joy-Con cover firmly docks the device and protects it from bumps and scratches. 9658 cutouts and buttons - full access to ports and buttons; provides SL and SR buttons on the top of grip to facilitate your game control.
9658 easy installation - Quick snap-on installation and easy removal offer you maximum convenience.
9658 ergonomic design - curved palm design reduces hand fatigue and provides you with ultra comfortable experience; perfect for extended, high-stress gaming sessions. 9658 quality assurance - made of premium material ABS Resins which is impact-resistant and thermostable that guarantees its long working life.
| Brand | MoKo |
| Manufacturer | MoKo |
| Height | 3.81 cm (1.5 Inches) |
| Length | 13.97 cm (5.5 Inches) |
| Weight | 0.06 kg (0.13 Pounds) |
| Width | 9.14 cm (3.6 Inches) |
| Part Number | MK-NSwitch-grip-2pcs-1120F-red+blu-fA |
| Model | MK-NSwitch-grip-2pcs-1120F-red+blu-fA |
5. TNP Products
Protective Case Covers Anti-Slip Ergonomic Lightweight Design Comfort Grip Controller 1 Pair Neon Blue + Red, TNP Gel Guards with Thumb Grips Caps Works for Nintendo Switch Joy-Con Grip
TNP Products - Joy-con grip gel guards provides a protective layer works for Nintendo Switch Joy-Cons to guard against scratches and other low impact surface damage. The durable material also allows it to withstand every day wear & tear and can simply be wiped clean with a damp cloth.
The soft material acts as a protective barrier to minimize surface damage, for example, when placing the Joy-Cons down on a hard surface such as a table.
The rubberized material also provides added texture for better grip of your controllers. The flexible material is extremely durable, long lasting and can be wiped clean for continuous use and are easy to slip on and off. The slim profile of the cases also allows the to be conveniently left on when storing your Joy-Cons away.
| Brand | TNP Products |
| Manufacturer | TNP Products |
| Height | 2.54 cm (1 Inches) |
| Length | 13.97 cm (5.5 Inches) |
| Width | 8.89 cm (3.5 Inches) |
| Part Number | NDSWT_SLCN_BLU_RED |
6. ECSiNG
ECSiNG 3 Pair Left Right Slider Buckle Metal Lock Latch Bracket Controller Replacement Repair Part Tool Compatible with Nintendo Switch Joy-Con
ECSiNG - With the + screwdriver, open the screw inside. Br/>3. Br/>2. Take the small iron. Br/>4. Material: made of metal, more robust than the plastic parts.
Take out the original lock buckle carefully. Br/>5. Insert the spring into the metal clasp. Br/>6. Be careful not to reverse them. Note: the left buckle is different from the right one.
Compatibility: Compatible with Nintendo Switch Joy-con Controller. Put the small iron and the screw back. How to replace:1. Use the y screwdriver to open 4 screws. Function: replace your worn out, broken, damaged, old or lost sliding clasps. Insert the metal buckle into it and press the spring into the slot. Br/>7.
7. Bigben Interactive
Quad Charging Station für Joy-Con Controller / Ladestation für 4 Joy-Con Controller, Nintendo Switch
Bigben Interactive - Charger for 4 Joy-Con. Direct connection to the switch base, thanks to its built-in USB cable length: 100 cm. Operation leds: red during charging and blue when the Joy-Con is charged. Charging time up to 7 hours to fully charge all 4 Joy-Con.
| Brand | Bigben Interactive |
| Manufacturer | Bigben Interactive GmbH |
| Height | 12 cm (4.72 Inches) |
| Length | 21.5 cm (8.46 Inches) |
| Weight | 0.28 kg (0.61 Pounds) |
| Width | 12.8 cm (5.04 Inches) |
| Part Number | SWITCHQUADCHARGER |
| Model | SWITCHQUADCHARGER |
8. LICHIFIT
LICHIFIT 1 Pair Joy-Con Gamepad Handle Lock Wrist Strap Lanyard for Nintendo Switch Controller
LICHIFIT - Bigger signal lights, adjustable wrist rope. The mark "+" and "-" is clear and remind you not to connect the wrong side of Strap with your Joy-Con. This jon-con wrist strap is designed perfect to slide out, more smoothly than the original buckle design.
Joy-con wrist strap designed specifically for Nintendo Switch gamer, insure you play games on Nintendo Switch smoothly and safely. Improve your playing experience with Nintendo Switch when you attach this strap to your controllers.
9. The Lord of the Tools
SL SR Right Left Trigger Button Ribbon Flex Cables Set with Cross Tri-Wing Screwdrivers Fit for Nintendo Switch Joy-Con Controller
The Lord of the Tools - Package includes: sl sr button key flex cables for left right handle, with metal X-shaped Y-shaped screwdrivers. Magnetic screwdriver bit: It can suck mini size screws, not easy to fall off, convenient to use.
Applicable model: compatible with Nintendo Switch JOY-CON. Replacement Parts: Professional installation are highly recomended. Note: please kindly confirm the fitment before ordering.
10. BIONIK
Tetra Power Quad Port Charging Dock For Joy-Con Controllers Nintendo Switch
BIONIK - Led charge status indicators. Designed to match the aesthetics of the Nintendo Switch console. Conveniently attaches to the Nintendo Switch dock for easy use. Built-in cable management system for customised cable length and storage.
| Brand | BIONIK |
| Manufacturer | Bionik |
| Height | 9.91 cm (3.9 Inches) |
| Length | 15.49 cm (6.1 Inches) |
| Weight | 0.18 kg (0.4 Pounds) |
| Width | 10.41 cm (4.1 Inches) |
| Part Number | BNK-9019 |
| Model | BNK-9019 |
Nintendo - They can also attach to the main console for use in handheld mode, or be shared with friends to enjoy two player action in supported games. Two joy con can be used independently in each hand, or together as 1 game controller when attached to the Joy Con grip. Each joy con has a full set of buttons and can act as a standalone controller, and each includes an accelerometer and gyro sensor, making independent left and right motion control possible.
TNP Products - Lightweight & ergonomic design with round edges curves making the grip comfortable to hold and reduces hand fatigue; increases gaming enjoyability and durability.
Sumind - Wonderful gaming experience: soft touch of the surface and the color design provides you with more accuracy and sensitivity for a more enjoyable play; Whether you are a casual gamer or a hardcore gamer, you can control your game world. Effective protection: soft silicon can protect the analog stick caps from long term corrosion and spalling, and prevent your gamer from bumps and scrapes, so these grip caps will make your equipment last longer; Apply it to make the joystick cap firmly cover over the joystick, no need to worry about shaking and not fitting.
MoKo - 9658 extra protection - special Joy-Con cover firmly docks the device and protects it from bumps and scratches. 9658 cutouts and buttons - full access to ports and buttons; provides SL and SR buttons on the top of grip to facilitate your game control.
TNP Products - Joy-con grip gel guards provides a protective layer works for Nintendo Switch Joy-Cons to guard against scratches and other low impact surface damage. The durable material also allows it to withstand every day wear & tear and can simply be wiped clean with a damp cloth.
ECSiNG - With the + screwdriver, open the screw inside. Br/>3. Br/>2. Take the small iron. Br/>4. Material: made of metal, more robust than the plastic parts.
Bigben Interactive - Charger for 4 Joy-Con. Direct connection to the switch base, thanks to its built-in USB cable length: 100 cm. Operation leds: red during charging and blue when the Joy-Con is charged. Charging time up to 7 hours to fully charge all 4 Joy-Con.
LICHIFIT - Bigger signal lights, adjustable wrist rope. The mark "+" and "-" is clear and remind you not to connect the wrong side of Strap with your Joy-Con. This jon-con wrist strap is designed perfect to slide out, more smoothly than the original buckle design. Joy-con wrist strap designed specifically for Nintendo Switch gamer, insure you play games on Nintendo Switch smoothly and safely. Improve your playing experience with Nintendo Switch when you attach this strap to your controllers.
The Lord of the Tools - Package includes: sl sr button key flex cables for left right handle, with metal X-shaped Y-shaped screwdrivers. Magnetic screwdriver bit: It can suck mini size screws, not easy to fall off, convenient to use. Applicable model: compatible with Nintendo Switch JOY-CON. Replacement Parts: Professional installation are highly recomended. Note: please kindly confirm the fitment before ordering.
BIONIK - Led charge status indicators. Designed to match the aesthetics of the Nintendo Switch console. Conveniently attaches to the Nintendo Switch dock for easy use. Built-in cable management system for customised cable length and storage.
